| Customization: | Available |
|---|---|
| After-sales Service: | According to The International Standards, Pump 1 Y |
| Warranty: | 3 Years |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
STANDARD -SC Series Glue Dosing Screw Pump
The Standard -SC series of metering and filling screw pump is designed for glue with high viscosity and chemical, pharmaceutical and other industries, can accurately convey and measure a synthetic pump, its structure is fully suitable for smooth and low pulsating transmission medium, corrosive and anti-corrosion chemicals, chemicals can be very well measured.
The Standard company SC series metering and filling screw pump contains less parts, is very easy to maintain and repair, and the price is also affordable
Features of the Standard-SC Series dosing screw pump
(1) It is generally applicable to a variety of media (even acidic and alkaline media)
(2) Continuous low pulsation transmission, not affected by pressure and viscosity
(3) The conveying capacity is proportional to the rotational speed, and can realize high-precision metering and conveying in the whole speed range.
(4) Maintenance-free and easy maintenance
(5) Compact structure and high efficiency
Transportable medium:
Natural and artificial polymers, anionic and cationic polyelectrolytes, iron and aluminum salts (such as ferric chloride), limewater, wastewater, suspensions, organic or inorganic acids or bases, etc
Standard SC series metering glue screw pump technical parameters chart:
|
| Art. No. | Allowable Speed | Optimum Speed | Recommended Amount of Glue | Output Pressure | Starting Torque |
| SC-0.5cc | 12-300rpm | 15-60rpm | 0.13-0.5ml/s | 24bar |
≥10nm
|
| SC-1.5cc | 12-300rpm | 15-60rpm | 0.38-1.5ml/s | 18bar | ≥10nm |
| SC -3cc | 12-300rpm | 15-60rpm | 0.75-3ml/s | 18bar | ≥16nm |
| SC -6cc | 12-300rpm | 15-60rpm | 1.5-6ml/s | 18bar | ≥20nm |
| SC-12cc | 12-300rpm | 15-60rpm | 3-12ml/s | 18bar | ≥30nm |
| SC-24cc | 12-300rpm | 15-60rpm | 6-24ml/s | 18bar | ≥50nm |
| SC-48cc | 12-300rpm | 15-60rpm | 12-48ml/s | 18bar | ≥100nm |
| SC-96cc | 12-300rpm | 15-60rpm | 24-96ml/s | 18bar | ≥200nm |
| SC-200cc | 12-300rpm | 15-60rpm | 50-200ml/s | 18bar | ≥400nm |
Note:The speed varies according to the characteristics of the medium. For the medium with high viscosity, high solid content, high abrasiveness and poor fluidity, low speed should be selected as far as possible. Please contact our staff for detailed selection
Stardard SC series metering glue screw pump outline dimensional drawing:
| Model No. | Size(A) | Size(B) | Inlet | Outlet | (C) Shaft diameter(C) | (D)Pin | Weight(kg) |
| SC-0.5cc | 192 | 305 | G3/4" | G3/8" | 20 | 6*6 |
4.8
|
| SC-1.5cc | 230 | 343 | G3/4" | G3/8" | 20 | 6*6 | 4.9 |
| SC -3cc | 225 | 340 | G3/4" | G3/8" | 20 | 6*6 | 4.95 |
| SC -6cc | 245 | 360 | G3/4" | G3/8" | 20 | 6*6 | 5 |
| SC-12cc | 280 | 395 | G3/4" | G3/8" | 20 | 6*6 | 6.1 |
| SC-24cc | 365 | 475 | G1" | G1/2" | 20 | 6*6 | 7.8 |
| SC-48cc | 465 | 580 | G1 1/2" | G1" | 24 | 8*8 | 11.75 |
| SC-96cc | 540 | 655 | G1 1/2" | G1" | 24 | 8*8 | 16.5 |
| SC-200cc | 645 | 765 | G1 1/2" | G1 1/2" | 35 | 10*10 | 21.5 |
|
Structure of Dosing Pump Series product
|
|
(1) Rotor: Can assemble advanced chrome plated steel rotor for conveying abrasive or non- lubricating medium
(2) Stator: Vulcanized tube, sealed at both ends, made of a variety of rubber, plastic and metal materials Tube vulcanization, both sides sealed, using a variety of rubber, plastic and metal materials.
(3) Mechanical seal cavity: The seamless mechanical seal is located in the fluid medium to ensure the permanent flushing of the medium to prevent the deposition of solid materials.
(4) Suction and discharge: The suction chamber and discharge body are made of SUS304.SUS316L material, which makes it easier to install and disassemble the equipment through the flange. Import and export dimensions can be changed according to customer requirements.
The maintenance of vulnerable parts
(1) Rotor and stator
The wear rate of the two components is related to many factors, such as the wear characteristics, rotational speed and pressure of the pumping material. When the pump performance is reduced to meet the requirements, One or both of the stator and rotor components should be replaced
(2) Drive Shaft
The wear rate of the filler contact surface depends on many factors, such as the abrasion and rotational speed of the medium. Constant maintenance of filler can maximize the service life of the pump shaft. When shaft seals fail, the shafts and fillers need to be replaced at the same time.
(3) Connecting Rod Assembly
Regular maintenance and lubrication can maximize the service life of the connecting parts. When the parts appear obvious wear and tear, should replace the connecting parts connecting the component, if necessary, can replace the whole shaft
(2). At what temperatures can Standard pumps be used ?
Standard progressive cavity pumps can be used at temperatures from 0 °C to 90° C.
|
||
|
Add: No, 2 Hengfong Road, Science Technology Industrial Park, Nanhai District, 528225 Foshan City, Guangdong Province, China | |
| Attn: Ms. June Zhang | ||
| T E L / W H : 0086-18942424342 | ||
|
||
){kind=link}